dmesg 信息是
[60349.673296] sd 14:0:0:0: [sdd] Spinning up disk...
[60350.548326] sd 10:0:0:0: [sdc] Spinning up disk...
[60359.619120] sd 14:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
[60359.619121] sd 14:0:0:0: [s国外服务器dd] 0-byte physical blocks
[60359.619487] sd 14:0:0:0: [sdd] Test WP failed, assume Write Enabled
[60359.619891] sd 14:0:0:0: [sdd] Asking for cache data failed
[60359.619893] sd 14:0:0:0: [sdd] Assuming drive cache: write through
[60359.632107] sd 14:0:0:0: [sdd] Attached SCSI disk
[60360.067306] sd 10:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[60360.067307] sd 10:0:0:0: [sdc] 0-byte physical blocks
[60360.067675] sd 10:0:0:0: [sdc] Test WP failed, assume Write Enabled
[60360.068085] sd 10:0:0:0: [sdc] Asking for cache data failed
[60360.068087] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[60360.092342] sd 10:0:0:0: [sdc] Attached SCSI disk
parted /dev/sdc
print
可以看到信息吗

前阵子刚挂过一个硬盘
https://leimao.github.io/blog/Linux-Install-Hard-Drive/

不晓得是不是你没格式化

0-byte physical blocks
是容量被识别错了？ smartctl 看看，然后检查一下数据线以及换个内核版本？